Pyhodi Antenna Tuner Power Standing Wavemeter, at 100M Pro Power SWR Meter for Radio Station Antenna, 1.8mhz to 30mhz Frequency, 2 Adjustment Modes, Support 6 Status Interfaces, Pyhodi0pxusw7efg

Specification:Item Type: Antenna Tuner Power Standing WavemeterMaterial: Aluminum AlloyModel: AT 100M Pro Supported Radio: Any Radio Support Antenna: Any Antenna Frequency: 1.8-30MhzPower Range: 1-18Mhz, SSB, CW 0.1W-100W, Peak 150W 18-30Mhz, SSB, CW 0.1W-50W1-30Mhz, FM, AM, FT8 0.1W-50WCapacitance: Maximum 3869pFInductance: 17.21uH MaximumCW Key: 3.5mm JackCharging: Type C USB 5V 1A ( Support Overcharge and Overdischarge Guard )Battery: Rechargeable Lithium Battery 3300mAh x 1 ( Shipped With Built In Battery )Shutdown Current: Approx. 15uAStandby Current: Approx. 13mA, Approx. 150-200 Hours Standby ( No Tuning Status )Tuning Standby: Starting 1-3 relays requires a current of 130-330mA, about 10-25 hours of standby.Charging Time: Fully charged for about 4 hours. LEDs are red when charging and green when fully charged.Package List:1 x Antenna Tuner Power Standing Wavemeter1 x L Wrench1 x USB Cable1 x Foot Pad1 x ManualNotice:1. Please calibrate the VSWP value of the device when you use it for the first time or change the radio, please refer to the instruction manual for details.2. This power standing wavemeter can withstand different power at different frequencies or in different modes, please refer to the instruction manual for details.3. The number of relays operating at different tuning levels will affect battery life.

• 【Wide Range Of Application】This antenna tuner and power standing meter supports any radio station and antenna, no need for professional data lines, suitable for most radio stations and antennas on the market, such as , USDX, QRP and other radio stations, supports end-feed, vertical, horizontal and other antennas
• 【Antenna Tuner + Standing Wavemeter 2 and 1】This antenna tuner and SWR power meter is an antenna tuner, as well as a power and standing meter, supporting the display of standing values, forward power, and reverse power. Power meter mode supports maximum display of 150W SSB/CW in untuned state.
• 【Powerful Tuning Capability】The built-in combination of large capacitor and inductance values greatly improves the tuning success rate and reduces the trouble of repeatedly adjusting the antenna system. The maximum combined values for capacitors are up to 3869pF and for inductors up to 17.21uH.
• 【Morse Code Practitioner】This antenna tuner and standing wavemeter has a 3.5mm headphone jack on the back panel and supports external single-paddle buttons, allowing you to easily practice Morse code in your spare time. No need to buy a separate Morse Code exerciser, just one device does it all.
• 【Manual Tuning And Automatic Tuning】Supports two modes: manual tuning and automatic tuning. In automatic mode, when monitoring radio , when the standing exceeds the set value (default 1.80), the lowest standing is automatically triggered. In manual mode, you can manually increase or decrease the value through automatic tuning or directly adjust the capacitance or inductance value to a very low standing ratio.
• 【Built-in Professional Settings】The system supports 13 advanced parameter configurations, suitable for advanced players to deeply customize, such as automatic storage number, tuning speed, starting power, starting standing , power calibration, standing calibration, test, relay test and other functions , customize your tuning system
• 【6 Status Interfaces】The system supports 6 status interfaces, including user storage interface, bar power standing meter interface, large font interface, standing curve interface, interface, relay and battery voltage status interface
• 【High Power Resistance】The antenna tuner and antenna power SWR meter uses wide lines, imported magnetic powder rings, high-quality copper wires, rated power resistance 100W (SSB), and instantaneous peak power resistance 120W (SSB mode)
• 【Built-in 3300mAh Lithium Battery】Uses imported polymer lithium battery with super large capacity of 3300mAh. Untuned standby time can reach 150~200 hours. After tuning, the average standby time is about 15 hours. It is very suitable for outdoor portable operation and supports Type-C interface. , as you . The system interface displays the battery voltage and remaining power in real time, so you no longer have to worry about running out of power when using it outdoors.
• 【Small and Portable】This antenna tuner standing meter is small in size, only about the size of a mobile phone, only 154mmx74mmx29mm (length x width x thickness). It has a compact appearance and is portable outdoors. The metal shell is sturdy and and weighs only 400g.